MENU
产品 · 展示
尼龙增韧剂SWR-3F1
尼龙增韧剂SWR-3F1
技术指标:
序号 |
项目 |
指标 |
1 |
外观 |
微黄色透明颗粒 |
2 |
密度(g/cm3) |
0.88 |
3 |
熔体流动速率g/10min |
1.0-2.5 |
4 |
接枝率(重量%) |
≥0.9 |
使用范围:
本系列增韧剂适用于增韧和增强尼龙,有相当好的耐低温性、耐候性和抗冲击性。
在–20°C ~–30°C时冲击强度较常温降低10%左右。
使用方法:
可直接与物料混合增韧,无须干燥处理,经螺杆挤出造粒效果更佳。
参考配比量:
5-8%或用户根据要求和性价比酌情填加。
存储:
20公斤包装,存放于通风干燥处,自生产日不超过6个月。
沈阳总部及东北华北销售部:
地 址:沈阳市铁西区翟家工业区
电 话:024-25811698 89354005
传 真:024-25818618 89353355
联系人:杜先生13940450820
张女士13940083909
李先生13998856956
网 址:www.syswpp.com
邮 箱:sy_siwei@yahoo.cn
华东地区办事处:
地 址:浙江省余姚市中国塑料城路东2-61号
电 话:0574-62539850
传 真:0574-62539850
联系人:刘先生13958343375
华南地区办事处:
地 址:广东省东莞市樟木头塑胶市场G栋8号
电 话:0769-87701526
传 真:0769-87120051
联系人:胡先生13926854335
SWR-3F1 (Toughening agent of PA)
Property:
Project |
Property |
Appearance |
light yellow translucent pellet |
Density(g/ cm3) |
0.88 |
MFR g/l0min(190℃,2.16kg) |
1.0-2.5 |
MAH graft ratio(%) |
≥0.9 |
Applications:
SWR-3F1 can be used for toughening agent of Nylon. Blends using SWR-3F1 exhibit excellent low temperature resistance and impact performance.
Impact strength ofblends was decreased 10% in–20°C ~–30°C.
Application method:
Injection with Nylon directly or blending by twin screw extruder without drying of SWR-3F1.
Proposed amount:
The addition levels from 5 to 8% based on customer requirements.
Package and storage:
20 kg/bag, store in shady, dry and well-ventilated place, avoiding moisture during transportation. The goods store for 12 months from the date of manufacture.
Notice: Above data is experiment typical, true and reliable. It isn’t commitment of the quantity guarantee, but reference.
Address:
Zhaijia Industry Park, Tiexi District, Shenyang, Liaoning Province, China.110178
Mobile: 86-24-13940486452
Tel: 86-24-89354005
Fax: 86-24-25818618
Email: sy_siwei@yahoo.cn
Http://www.syswpp.com