MENU
产品 · 展示
尼龙增韧剂SWR-3C
尼龙增韧剂SWR-3C
技术指标:
序号 |
项目 |
指标 |
1 |
外观 |
白色颗粒 |
2 |
密度(g / cm3) |
0.89 |
3 |
熔体流动速率g / 10min (190℃2.16kg ) |
1.2 |
4 |
接枝率 % |
0.8 |
使用范围:
本系列增韧亮晶剂适用于PA6或者PA66阻燃增韧和阻燃增强增韧,有利于阻燃剂的分散,能提高制品的冲击性能和耐低温性能。
适用于对PA6或PA66要求较高的染色工艺中,促进染料的均匀和分散,不会影响染料的色泽。
同样适用于其他种类尼龙增韧剂的使用范围。
使用方法:
可直接与物料混合增韧,无须干燥处理,经螺杆挤出造粒效果更佳。
参考配比量:
5-8%或用户根据要求和性价比酌情填加。
存储:
20公斤包装,存放于通风干燥处,自生产日不超过6个月。
沈阳总部及东北华北销售部:
地 址:沈阳市铁西区翟家工业区
电 话:024-25811698 89354005
传 真:024-25818618 89353355
联系人:杜先生13940450820
张女士13940083909
李先生13998856956
网 址:www.syswpp.com
邮 箱:sy_siwei@yahoo.cn
华东地区办事处:
地 址:浙江省余姚市中国塑料城路东2-61号
电 话:0574-62539850
传 真:0574-62539850
联系人:刘先生13958343375
华南地区办事处:
地 址:广东省东莞市樟木头塑胶市场G栋8号
电 话:0769-87701526
传 真:0769-87120051
联系人:胡先生13926854335
SWR-3C (Toughening agent of PA6)
Property:
Project |
Property |
Appearance |
White or light yellow pellet |
Density(g/ cm3) |
0.90 |
MFR g/l0min(190℃,2.16kg) |
1.2 |
MAH graft ratio(%) |
0.8 |
Applications:
SWR-3C without free MAH monomer can be used for PA6 or PA66,flame retardant plastics, glass fiber reinforced plastic. Blends using SWR-3C exhibit significant improvement in impact strength, low temperature and processing performance. Water absorption of the products will be decreased.
SWR-3C can be used as compatibilizer of PA6/PE blends .
SWR-3C can't have effect on the color and lustre ofblends.
Application method:
Blending by twin screw extruder was suggested without drying of SWR-3C.
Proposed amount:
The addition levels from 5 to 25% based on customer requirements
Package and storage:
20kg/bag,store in shady, dry and well-ventilated place, avoiding moisture during transportation. The goods store for 12 months from the date of manufacture.
Notice: Above data is experiment typical, true and reliable. It isn’t commitment of the quantity guarantee, but reference.
Address:
Zhaijia Industry Park, Tiexi District, Shenyang, Liaoning Province, China.110178
Mobile: 86-24-13940486452
Tel: 86-24-89354005
Fax: 86-24-25818618
Email: sy_siwei@yahoo.cn
Http://www.syswpp.com